Download English Version 1.1

User’s Manual
NOTE: The dwell time is only adjustable when selecting Preset as
the alarm action.
•
EXIT
Exit the ALARM SETTING menu.
3.3.19
ALARM DETECT (18× / 26× Model Only)
This function instructs the camera to detect movement within the monitoring area and
then send an alarm signal automatically. Before activating this function, alarm
connection setups must be completed in advance.
ALARM DETECT
DETECT SWITCH
OFF
DETECT MODE
INT. FOCU
EXIT
YES
•
DETECT SWITCH
This option is used to enable or disable the ALARM DETECTION function.
•
DETECT MODE
Four alarm detection modes are provided for different applications.
INT. FOCUS (Internal Focus)
The alarm will be triggered if the internal focus changes; if the focus returns
to the original position, the alarm will stop.
FIX FOCUS
If focus movement is detected, the alarm will be triggered, and the alarm stops
when the focus returns to the original position. If the detected focus movement
keeps changing for more than four seconds, the new focus position will be
memorized as the reference, and the alarm will stop.
NOTE: The INT. FOCUS and FIX FOCUS detection modes will only
be activated in auto focus mode.
INT. AE (Internal AE)
When Auto Exposure (AE) movement is detected, the alarm will be triggered;
if the Exposure Level returns to the original level, the alarm will stop.
FIX AE
The alarm will be triggered if the Exposure value changes; if the adjusted AE
value persists for four seconds, the new value will be saved as the reference,
and the alarm will stop.
40