Download User Guide - HSM Performance Pack for Mastercam

Transcript
18
Mastercam HSM Performance Pack User Guide
Internet, and the newer version downloaded is not automatically
installed, it must be manually installed after download to be used.
The tool tab
In the large area, the tool is selected, or a new tool can be created from
the right click menu. The fields below are automatically updated from the
tool selected above. The tool drawing to the right is updated each time a
field is exited, to reflect the changed value. The right click menu is also
used to access the HSM tool library, described below.
The flute length doesn't have an effect on the shape of the cutter paths
unless a taper angle is applied. Tapered tools add the shape of a cone of
the given taper angle from the vertical axis. The bottom of the (truncated)
cone is tangential to the shape at the tip, and the top is at the flute length
above the tip. For tapered tools, the tool definition is straightforward for
ball nosed and flat bottomed tips, but for bull nosed tips the standard
convention is more complicated: the shaft diameter refers to the