Download LED Clocks - KERA Technologies

SELENA Multifunctional LED Clock
USER MANUAL V.27
INSTALLATION
NOTE: Before installation, determine the correct voltage rating required for the particular clock model.
The Clock may be installed using special ceiling mounting kit or on a wall as per attached installation drawing
and instructions.
Models for use as desktop should be plugged into the power line outlet using the attached power cord extending
from the back panel.
Keep the clock away from water, excessive heat, moisture and dust or chemically aggressive environment.
POWER Connection
NOTE: Before installation, determine the correct voltage rating required for the particular clock model.
Make sure that all power is disconnected.
Please observe local electrical code requirements while installing the power connections.
For models with the power cord just plug it into available power outlet.
For models With the Power Terminal block follow the instructions:
1.
Locate the power screw terminal marked “POWER LINE” on the back panel of the enclosure.
Power Fuse
POWER LINE
2.
Power Terminal
Connect the Power Line wires, including the Ground wire, to the corresponding terminals and tighten
the screws securely.
If the Ground wire or the Ground Terminal is not available, leave that terminal unconnected.
4
KERA TECHNOLOGIES INC. 2010
www.ledclocks.com