Download INtime 4.0 Quick Start Guide
Transcript
Sample Application PCAP Sample Application Description Illustrates the use of the PCAP library to filter specific Ethernet packets from the network stack. This application illustrates the use of real-time interrupt system calls using the Transmitter Ready interrupt on COM1. Real-time Interrupt Sample A real-time thread takes over COM1 and toggles its Transmitter Ready interrupt. COM1 is disabled when the test ends. Make sure COM1 is available on your system before running this application. When you run the application, continuous activity occurs on the real-time side, preempting Windows for eight 10-second time periods. RSL Examples Demonstrates the creation and use of real-time Shared Libraries, the INtime analog of Windows DLLs. Serial Communications Sample This project demonstrates how to use the INtime Serial Communications library. TCP Samples Demonstrates TCP communications between a client and a server. Client and server code is provided for INtime and server code for Windows. UDP Samples UDP ping-pong sample application. Datagrams are exchanged between INtime and Windows. USB Keyboard Sample Client Demonstrates how to use the INtime USB subsystem by monitoring a USB keyboard and printing a dump of each keystroke as it occurs. Windows STOP Detection Sample Shows how an INtime application can detect either a Windows crash (blue screen) or a Windows shutdown event and prevent Windows from completing its normal actions until the real-time application has had a chance to perform a ―graceful‖ shutdown. page 46 of 46 Copyright © 2005-2009, TenAsys Corporation