Download "user manual"

To Fold Handle (Fig.2)
1. Press down ‘Lock Switch’
2. Turn ‘Handle’ to horizontal position.
Fig.2
To avoid a scald:
Don’t fold or unfold handle while iron has been heated. Do it before
heating and after cool down completely.
Fill ‘Tank’ with water
1.
2.
3.
4.
Hold iron with this position, make handle front higher than rear.
Turn Tank plug to side, and fill with a little cup. (Fig.3)
Stop when water rise to about this position. (Fig.4)
Replace and arrange “Tank plug”. (Fig.5)
Fig.3
Fig.4
Fig.5
Set ‘Steam switch’ to “O”, otherwise water drop from
soleplate.
Don’t make water overflow in order to protect against
electric shock caused. If have made overflow, clean with
Attention
dry cloth. Don’t pull Tank plug heavy: may be pull out it.