Download Undertow Suite

Transcript
Chapter 9: Working With PLI
Make sure LD_LIBRARY_PATH has $UT_ROOT_DIR/PLI/ specified in the path.
NOTE:
For UNDERTOW versions 2004.1.8 and up:
Use the correct PLI according according to the simulator type and version. $UT_ROOT_DIR/PLI
has the following .so files:
libpli.so.nc_verilog: For latest CADENCE LDV versions 4.1, 5.1, 5.2 and up
libpli.so.old_nc_verilog: For earlier CADENCE LDV versions
Make sure you do the following:
%cd $UT_ROOT_DIR/PLI/
%cp <the appropriate libpli.so.#####> libpli.so
For UNDERTOW versions 2004.1.7 and below:
For latest CADENCE LDV versions 4.1, 5.1, 5.2 and up:
Make sure you do the following:
%cd $UT_ROOT_DIR/PLI/
%mv libpli.so libpli.so.old
%cp libplivpi.so libpli.so
For earlier CADENCE LDV versions, libpli.so is used by default.
2)Add to source code close to top module
initial
begin
$vtDumpvars();
Undertow Suite
Proprietary and Confidential Copyright Veritools 2004 All Rights Reserved
450