Download Undertow Suite

Chapter 5: Undertow Reference Manual
•
Assign Scales—You can assign two different scales for a set of overlaying
waveforms, or you can set a single scale for each waveform. To make full use of
the left and right scales for overlaying waveforms:
1. Select Options->Properties->Grids & Scale from the menus.
2. Select Always for Show left and right scales.
You can then set two different scales and view them:
1.
2.
3.
4.
•
To set the first scale (left), set the bottom and top values.
Make sure that the correct waveform(s) are highlighted, and click Apply.
Click the Assign Right Scale button.
Repeat this process.
Horizontal and Vertical Offset—You can set these offsets to either scale.
1. Use Vertical offset to offset the voltage and current by the specified amount.
2. Use Horizontal offset to offset the time by the specified amount.
•
Properties for Entire Overlay—Whether the waveform shows voltage, current,
or another property. you can display the waveform as a linear or base 10 log plot.
To set this option, click the correct button for the property that you want to set,
and then click Apply.
Script Tool
This option opens the Script Tool window. For a more detailed description, see
Section , “Script Tool”.
Command Line
To open the Command Line Interface, at the bottom of your Undertow Window:
1. Click on the Analog Configuration icon.
2. Turn ON the Command Line Interface.
Undertow Suite
Proprietary and Confidential Copyright Veritools 2004 All Rights Reserved
188