Download WinPAC-8000 User Manual (Standard series solution)

Debug mode
Debug mode is a special environment in which program debug functions can be used in
addition to normal system functions.
Debug mode is unsupported.
OS Update mode
OS update mode is a way used to update OS. To update the WinPAC OS image, please
refer to “6.1. OS updates”
DCON_CE mode
This mode is the same as Normal mode. Besides, DCON_CE.exe will be run
automatically after booting
Tips & Warnings
DCON_CE.exe must be placed on the
\System_Disk\Tools\DCON_CE, or else DCON_CE.exe cannot be
run automatically after booting.
VCEP mode
This mode is the same as Normal mode. Besides, VCEP.exe will be run automatically
after booting.
Tips & Warnings
VCEP.exe must be placed on the \System_Disk\Tools\VCEP or
else VCEP.exe cannot be run automatically after booting.
WinPAC User 8000 Manual, version 2.0.5.
Last Revised: February 2011
Copyright © 2009 ICP DAS Co., Ltd. All Rights Reserved.
Page: 45
 E-mail: [email protected]