Download SMALL-SIZE EXPLOSIVE GAS MEASURING SENSOR

Transcript
OPTOSENSE LLC
Design Department
USER MANUAL
SMALL-SIZE EXPLOSIVE GAS MEASURING SENSOR MIPEX-02-Х-X-X.1 X
3. INTRINSIC SAFETY
Combined intrinsically safe parameters of sensor circuits are as follows:
IECEx/ATEX: Ui = 5.0V, Ii = 450mA, Pi = 0.25W, Ci = 38.8µF, Li = 0 mH.
CAN/CSA: Vmax = 5.0V, Imax = 450mA, Pmax = 0.25W, Ci = 38.8µF, Li = 0 mH.
It is allowed to connect the sensor only to intrinsically safe circuits with the rated direct
current output voltage (U0) within the range of not less than 3 V and not more than 5 V, with the
output power (P0) - not less than 0.02 W and not more than 0.25 W.
The gas-analyzing equipment, which is used with MIPEX-02, must meet the requirements of
IEC60079–0, IEC60079–11, IEC 60079-14 and have parameters conforming the MIPEX-02
intrinsic safety pointed above.
File name: ESAT.413347.006 UM v.2.0.docx
Revision 2.0 27 August 2015
Page. 8 of 38
THE SOLE PROPERTY OF OPTOSENSE LLC. ANY REPRODUCTION WITHOUT THE WRITTEN PERMISSION OF OPTOSENSE LLC IS PROHIBITED.