Download "user manual"

Transcript
Field
Description of Field
Height:
Check for height.
Configuring
Chainage Tol
From 0.001 to 100 Maximum permitted difference
in chainage between the measured and design
point.
Height Tol
K
From 0.001 to 100 Maximum permitted horizontal
offset from defined position.
Height Tol
L
From 0.001 to 100 Maximum permitted height
difference above the defined position.
Height Tol
From 0.001 to 100 Maximum permitted height
difference below the defined position.
Position Tol
From 0.001 to 100 Maximum permitted radial horizontal distance.
Beep near Pt
On or Off Activates an acoustic warning signal
when the horizontal radial distance from the
current position to the point to stake out is equal
or less than defined in Dist from Pt.
Dist from Pt
Available when Beep near Pt: On is selected.
Defines the horizontal radial distance from the
current position to the design point within which
the acoustic warning signal is active.
RoadRunner Rail
108