Download Pan-Tilt Unit (E Series) Command Reference Manual
Transcript
E Series Command Reference Manual 9.1.3 – Example The following command sets the host serial port RS-232/RS-485 to 19200 baud with 8 data bits per byte, no parity, no handshaking, and keeps the power-up baud rate at the default 9600. @(19200,0,F) * The following command sets the host serial port RS-232/RS-485 to 19200 baud with 8 data bits per byte, no parity, no handshaking, and changes the power-up baud to 19200. @(19200,0,T) * 9.1.4 – See Also Setting the PTU controller unit ID: Section 12.1 48