Download Pan-Tilt Unit (E Series) Command Reference Manual

Transcript
E Series Command Reference Manual
9.1.3 – Example
The following command sets the host serial port RS-232/RS-485 to 19200 baud with 8 data bits
per byte, no parity, no handshaking, and keeps the power-up baud rate at the default 9600.
@(19200,0,F) *
The following command sets the host serial port RS-232/RS-485 to 19200 baud with 8 data bits
per byte, no parity, no handshaking, and changes the power-up baud to 19200.
@(19200,0,T) *
9.1.4 – See Also
Setting the PTU controller unit ID: Section 12.1
48