Download Panasonic Movicon 11 Programmer Guide

•
•
The remote process can be restarted (not possible for the service). This
possibility is proposed when disconnecting from the Server. A window opens
where you can restart the project on the Server
Analyses the project statistics with the right debug window (not supported on
WinCE)
Other things to consider:
1.
2.
3.
4.
The remote debug messages have the lowest priority, they do not influence the
normal running of the system where network traffic is concerned
The project to be connected to must be enabled with the "Networking Server"
option (as well as the "Debugger" option) in the Networking Services settings
The Networking default transport is used for connecting in remote debug, this is
the one selected in the "Client Network Settings" of the project to be connected
to. This same transport must also be enabled in the Server's "Networking
Service" otherwise any attempt to connect will fail
The screen's file path and name can be entered in the command line instead of
those of the project and are exploited by Movicon to execute the remote project
debugging
Network Services Properties
The "Network Services" properties are used for defining the settings concerning both
Server and Client projects. This particularly includes the possibility to select and configure
which protocol to use for communicating through the Ethernet.
The available protocols are:
•
•
•
•
Local
TCP
UDP
HTTP
Some of the advanced protocol options may slow down
communications when dealing with big packets ("Sealing" and
"Enable Encryption" properties), or with supplementary operations
which the Server and Client must execute before sending packets
("Enable Compression" property).
Network Server Properties
The "Network Server" properties allow you to define the settings concerning the Server
projects.
Network Server
This property is used for enabling or disabling the Network Server for the project in
question.
Default Log On User
This property allows you to set the User that the Server project is to use for any
anonymous remote connections. Therefore any anonymous Client trying to connect to the
Network Server will be authenticated with the credentials of the user entered in this
property. This option is only used when the user management is active in the Server
project and behaves in the following way:
•
A Web Client project will be automatically authenticated with the user set as
"Default Log On User" in the Server. Therefore no login window will appear.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: [email protected]