Download 64Mbit Program Pattern Option User`s Manual - Electro

3.7 Edit Operation
(4)
Copy & Paste
Operating Procedures
1.
In the edit area, select the area of the data (1 byte or more) to be copied.
2.
Select [Edit] - [Copy] from the menu bar or click
3.
Select the area (1 byte or more) to which the selected data is to be pasted.
4.
Select [Edit] - [Paste] from the menu bar or click
on the toolbar.
on the toolbar.
The copied data will be pasted into the selected area.
Explanation
z Selecting an area
Area selection items include column, row, A to B, TOH/SOH, All TOH/SOH, PayLoad, All
PayLoad, Frame, and All.
The selected area will be highlighted.
• Column
The specified column is selected.
If you click the mouse with the focus located on a column button (in the edit area), all the
data present in that column will be selected.
If you select a column and drag the mouse or press a cursor key + [Shift] key, all the data
present in the selected column area will be selected.
• Row
The specified row is selected.
If you click the mouse with the focus located on a row button (at the left of the edit area),
all the data present in that row will be selected.
If you select a row and drag the mouse or press a cursor key + [Shift] key, all the data
present in the selected row area will be selected.
• A to B
The specified range is selected.
If you drag the mouse or press a cursor key + [Shift] key with the focus located on data
inside the edit area, the specified area will be selected.
If the selected area contains two or more columns, block selection will not be made. The
area starting from the left end of the displayed data through the beginning of the next row
up to the specified position will be selected.
• TOH/SOH (SONET/SDH mode)
The specified one TOH/SOH is selected.
For details, see Section 3.7 (7).
• All TOH/SOH (SONET/SDH mode)
The TOH/SOH of the specified frame is selected.
For details, see Section 3.7 (8).
• PayLoad (SONET/SDH mode)
The specified one PayLoad is selected.
For details, see Section 3.7 (9).
• All PayLoad (SONET/SDH mode)
The PayLoad of the specified frame is selected.
For details, see Section 3.7 (10).
• Frame (SONET/SDH mode)
The TOH/SOH and PayLoad of the specified frame are selected.
For details, see Section 3.7 (11).
• All (Program mode)
UserPattern is selected.
For details, see Section 3.7 (12).
3-16
IM810518801-61E