Download "user manual"

Feeds
Feed override for
circles G901
When circle contours are machined by milling tools and with tool radius
compensation (G41/G42) switched on, the feed on the cutter center point must
be corrected if the programmed F value is to act on the circle contour. With
feed override (G901) active, internal and external circle machining are
detected automatically.
The feed override can be switched off by G900.
Interface signal
When revolutional feed is active, the IS “Revolutional feed active” (V33000001.2)
is set.
Alarms
z
If no F word for G1, G2, G3, G5 is programmed, alarm 10860 is output.
No axis movement can be carried out.
z
When F0 is programmed, alarm 14800 is output.
z
If the spindle is on standstill when G95 is active, no axis movement can
be carried out. No alarm is output.
SINUMERIK 802S/C base line
Description of Functions
11-3