Download USER MANUAL

DIAG4BIKE® - User manual
1
2
7
Fig. 42 – Starting the analog measuring configuration
Fig. 43 – Analog measuring configuration is started by clicking the
configuration icon (pos 1) and confirming it (pos 2)
not enable <=> enable
3
4
Fig. 44 – By clicking the button at pos. 3, the analog measuring
function is enabled / not enabled
Fig. 45 – The change is confirmed by clicking the button at pos 4
The setting result is indicated through the button at pos. 1 Fig. 40 or Fig. 41.
B. MEASURING WITH A VOLTMETER – WITHOUT DIAGNOSTICS
When the analog measuring is enabled (see Chapter 12.5.2/A), then after clicking the button at pos. 1, Fig. 41 the
measuring itself is started (see Fig. 46). In this case the voltmeter measures voltages in two channels (A, B) against the
ground.
8
By clicking the button at pos. 6, the currently displayed
values can be printed out using the default printer
(preconfigured in accordance with Chapter 8.2.4.12).
After clicking the button 8, another screen with buttons
appears (see Fig. 47).
6
Fig. 46 – Example of measuring with voltmeter in two channels.
d4b-user-manual-us-114.doc
— 21 —