Download BIOS-User-Manual-C341-V100

The Setup Guide
PhoenixBIOS 4.0 User's Manual
Main Menu Selections
You can make the following selections on the Main Menu itself. Use the sub
menus for other selections.
Feature
Options
CPU Type
N/A
CPU Speed
N/A
System Memory
N/A
Extended Memory
N/A
System Time
System Date
Diskette Drive A
Diskette Drive B
HH:MM:SS
MM/DD/YYYY
1.44 MB, 3 ½"
2.88 MB, 3 ½"
Disabled
Description
Displays type of
processor detected
during bootup.
Displays the clock rate
detected during bootup.
Displays amount of
conventional memory
detected during bootup.
Displays the amount of
extended memory
detected during bootup.
Set the system time.
Set the system date.
Select the type of
floppy-disk drive
installed in your
system.
You can set the boot sequence of the bootable drives by selecting Boot Sequence
on the Main Menu or opening the Boot Menu.
Masters and Slaves
The Master and Slave settings on the Main Menu control these types of devices:
•
Hard-disk drives
•
Removable-disk drives
•
CD-ROM drives
There is one IDE connector on your motherboard, usually labeled "Primary IDE".
There are usually two connectors on each ribbon cable attached to IDE connector.
When you have connected two drives to this connector, the one on the end of the
cable is the Master.
When you enter Setup, the Main Menu displays the results of Autotyping–
information each drive provides about its own size and other characteristics–and
how they are arranged as Masters or Slaves on your machine.
Page 6