Download Messaging Software User Manual PC OPERATIONS

Programming Manual
1.3: To connect your badge to a computer
To do this, you’ll need to plug the RS232 cable port into the serial port of your laptop or
desktop PC, and then plug another end into the badge as below shown
LED Badge
Signal Cable
To one of the PC’s
COM (RS232) ports
PC
Note: Please PAY SPECIAL CARE for the connection, because the communicate port on
the badge will be easily broken by a strong force
2: Software Operation
2.1: To install the software into your PC
Users can omit this part if the software was already installed.
Messaging Software allows you to send messages to your badge using a computer.
Please follow the following steps to install your software:
z
Turn on your computer and start Windows
98/2000/XP.
z
Insert
our
provided
software
disk
into
CDROM of your computer
z
Double click the SETUP.EXE icon to start the
software installation.
z
Follow the on screen instructions to finish the
installation.
z
The operating software will be installed under the directory of “C:\Program
Files\LED TAG\”.
- Page 3-