Download user`s manual
Transcript
USER'S MANUAL Installing the Driver Software and OnDVD Software on Windows 98, Me, and 2000: This card reader is relatively easy to install and operate. To avoid complications during the installation process, please follow the steps in order as described in this chapter. Before connecting and using the card reader, you must first install the device drivers located on the accompanying Dazzle Installation CD. NOTE: The screenshots below may vary slightly from those on your computer screen. IMPORTANT NOTE: For the CompactFlash, MultiMediaCard/Secure Digital, and Memory Stick readers, driver installation is only required for Windows 98 and 98SE. Driver installation is not required for Windows 2000 and Windows Me. Simply connect the card reader and access the reader by using the “RemovableDisk” icon in “My Computer”. For the SmartMedia card reader, driver installation is required. 1. Start your computer running Windows. Close all open applications and insert the Dazzle Installation CD. The auto-run program will then launch the setup application automatically. If the installer does not begin momentarily, double-click on "My Computer." Next double-click on the drive corresponding to your CD-ROM, then double-click on the "Setup.exe" file to begin. Click Install Drivers. 2. A menu will appear with several options (as shown on top left). Select "Install Drivers" from the first menu. NOTE: From this menu you can also install Dazzle OnDVD and Acrobat Reader. 3. 14 On the next screen (as shown on bottom left), select your reader model from the four models displayed. (CompactFlash, MultiMediaCard/Secure Digital, SmartMedia, and Memory Stick).