Download User Manual - Area

VC80, VC100, VC120 User Manual
Phase IX Software Version 90.20.16.304 and later
SDI 2 (Button)
Assigns the embedded audio from the SDI 2 to the currently selected input or output channel. After
selecting, press the Rotary Encoder to accept.
Button Color
State
Mode
Comments
Red
Flashing
Update
No input signal (only when selected)
Green
Solid
Update
Available, but not selected
Cyan
Solid
Active
Shows association with currently selected input or output
Blue
Solid
All
Shows the state of the currently selected interlaced or
segmented frame input or output
Flashing
Update
New interlaced or segmented frame source or destination
selected – Press the Rotary Encoder to confirm
Magenta
Solid
All
Shows the state of the currently selected progressive input or
output
Magenta
Flashing
Update
New progressive source or destination selected – Press the
Rotary Encoder to confirm
Off
N/A
All
Disabled if SDI 1 is selected as the input video source
Blue
AES (Button)
Assigns AES audio to the currently selected input or output channel. After selecting, press the Rotary
Encoder to accept.
Button Color
State
Mode
Comments
Red
Flashing
Update
No input signal (only when selected)
Green
Solid
Update
Available, but not selected
Cyan
Solid
Active
Shows association with currently selected input or output
Blue
Solid
All
Shows the state of the currently selected input or output
Flashing
Update
New source or destination selected - Press the Rotary Encoder
to confirm
N/A
All
Disabled if the audio daughter board is not installed
Blue
Off
54