Download Multiphor ll Electrophoresis System
Transcript
5 Operation To ensure that the current passes through the gel, all components of the transfer sandwich are cut to the same size as the gels to be transferred. 40 8. Saturate the cathode electrode plate with distilled water and remove any excess with absorbent paper. Place the cathode on top of the transfer sandwich and connect the socket on the black cathode lead to the cathode pin in the Multiphor II base. 9. Close the Multiphor II safety lid and connect the unit to the power supply. It is recommended to run the transfer at a constant current of 0.8 mA/cm2. A transfer time of approximately 1 hour is normal. Note: The current is calculated using the surface area (total length x width) of the transfer sandwiches, and this calculation applies irrespective of the number of transfer sandwiches in the stack. Note: For transfer times longer than one hour turn off the power supply, remove the safety lid and carefully lift the cathode (top) electrode without disturbing the filter papers or gel. Carefully pour on additional transfer buffer to re-wetting the filter paper. Multiphor ll Electrophoresis System User Manual 18-1103-43 Edition AK