Download ModelSim SE Reference Manual
Transcript
Commands configure • -signalnamewidth [<value>] Controls the number of hierarchical regions displayed as part of a signal name shown in the pathname pane. Optional. Default of 0 displays the full path. 1 displays only the leaf path element, 2 displays the last two path elements, and so on. Related Tcl variable is PrefWave(SignalNameWidth). Can also be set with the WaveSignalNameWidth variable in the modelsim.ini file. • -timecolor [<color>] Specifies the time axis color. Default is green. Optional. Related Tcl variable is PrefWave(timeColor). • -timeline [<value>] Specifies whether the horizontal axis displays simulation time (default) or grid period count. Default is zero. When set to 1, the grid period count is displayed. Related Tcl variable is PrefWave(timeline). • -timelineunits [fs | ps | ns | us | ms | sec | min | hr] Specifies units for timeline display (does not affect the currently-defined simulation time). Default is ns. • -valuecolwidth [<width>] Specifies in pixels the width of the value column. Default is 100. Related Tcl variable is PrefWave(valueColWidth). • -vectorcolor [<color>] Specifies the vector waveform color. Default is #b3ffb3. Optional. Related Tcl variable is PrefWave(vectorColor). • -waveselectcolor [<color>] Specifies the background highlight color of a selected waveform. Default is grey30. Related Tcl variable is PrefWave(waveSelectColor). • -waveselectenable [<value>] Specifies whether the waveform background highlights when an object is selected. 1 enables highlighting; 0 disables highlighting. Default is 0. Related Tcl variable is PrefWave(waveSelectEnabled). To get a more readable listing of all attributes and current values, use the lecho command, which pretty-prints a Tcl list. There are more options than are listed here. See the output of a configure list or configure wave command for all options. Examples • Display the current value of the strobeperiod attribute. config list -strobeperiod ModelSim SE Reference Manual, v6.4a 153
Related documents
ModelSim PE Reference Manual
Command - Electrical and Computer Engineering
ModelSim SE Command Reference
ModelSim Reference Manual
ModelSim SE User`s Manual
Volume 6, Issue 2 - Verification Academy
ModelSim 6.4 Quick Guide
Wave Window
Notes - Read
Volume 7, Issue 2 - Verification Academy
ModelSim 6.0 Quick Guide
ModelSim SE User`s Manual