Download ModelSim SE Reference Manual
Transcript
Commands vsource vsource The vsource command specifies an alternative file to use for the current source file. This command is used when the current source file has been moved. The alternative source mapping exists for the current simulation only. Syntax vsource [<filename>] Arguments • <filename> Specifies a relative or full pathname. Optional. If filename is omitted, the source file for the current design context is displayed. Examples vsource design.vhd vsource /old/design.vhd ModelSim SE Reference Manual, v6.4a 553
Related documents
ModelSim PE Reference Manual
Command - Electrical and Computer Engineering
ModelSim SE Command Reference
ModelSim Reference Manual
ModelSim SE User`s Manual
Volume 6, Issue 2 - Verification Academy
ModelSim 6.4 Quick Guide
Wave Window
Notes - Read
Volume 7, Issue 2 - Verification Academy
ModelSim 6.0 Quick Guide
ModelSim SE User`s Manual