Download KCjunior Users Guide - Bio-Tek

Index
2 Parameter curve 5:56
4 Parameter curve 5:56
A
Aborting a read in progress 6:9, 6:11, 10:9
Add to List button 5:48, 5:49
Addition (in a formula) 5:50
Adjusted value 7:37
Algorithm for auto sensitivity
adjustment 7:33
Allow pathname selection at
program start 4:12
Ambiguous curve 12:1
Apply to all wells 5:47, 5:48
Apply to selection 5:47, 5:48
Archive
Archive protocol database 9:15
Archive results database 9:15
Archiving results records and protocols 9:15
Archiving stored curves 9:17
Archiving test results 9:18
Creating archive databases 9:15
Auto sensitivity adjustment
Algorithm 7:33
Base value 5:30
Defining the pre-reading parameters 5:28
High value 5:30
High well range 5:29
Low well range 5:29
Overview 5:28
Test well range 5:29
Use result for all filter sets 5:30
Viewing results of pre-readings 7:32
Average standards 5:57, 12:1
B
Backup procedures 9:14
Bandwidth
Defining in a filter set 5:25
Warnings 5:25
User's Guide to KCjunior
Barcode scanning 4:10, 6:11
Basecode version 4:3
Base value 5:30
Baud rate 4:3, 4:4
Bio-Cell(tm) 5:17, 7:18
Bio-Tek, contacting 1:3
Blank Data 7:5, 7:9, 7:16
Blank limits, setting 5:9
Blanking method 5:39, 5:41
Blanks, defining 4:5, 5:38
Bottom optical probe 5:25
C
Calibrate before first read 5:37
Calibrating the reader 5:37, 6:8
Chemistry 5:21
Closing a results record 6:4
Coefficient of variation (CV) 5:50, 7:30, 12:1
Colors, changing 4:5, 4:9
Communication
Connecting the reader to the computer 4:2
Errors 6:17, 10:2
Get communication defaults 4:4
Port 4:4
Reader system test 4:4, 9:8
Testing communication 4:5
Comparison value (OD) 5:33
Computer
Minimum system
requirements 2:1, 2:2
Conc x dilution 5:51
Concentrations
Calculated concentrations 7:20
Defining expected 5:42
Viewing results 7:20
Configuring setup parameters 4:5, 5:39
Configuring well identifiers 4:7
Connecting the reader to the computer 4:2
Constant value 5:18
Contacting Bio-Tek Instruments, Inc. 1:3
Continuous shake 5:35
Index • 13-1