Download Osprey User`s Manual

Configuration
Controls write protect.
XMS =
Specifies XMS memory for use as a RAM disk. XMS memory is typically provided
by HIMEM.SYS.
(NT)
A synonym for Mem =, provided to maintain compatibility with DOS configuration files.
(DOS)
XMS /Name:C:\IMAGES\UTILDISK.DU0 = MSCP /Unit:2
/Mount:{Yes No}(NT)
The default is Yes.
Controls whether the disk is mounted during startup.
/Name:filename
Specifies a container file used to initialize the RAM disk. Also, if /WriteBack:On is
present, the RAM disk will be written back to this file when the system shuts down.
See page 29 for details about filenames with spaces.
/RX50:{On Off}
The default is Off.
Enables RX50 style sector numbers.
/Size:blocks
The default is all available memory, or the size of /Name: if specified.
Specifies the maximum number of 512 byte blocks to be used.
/UnitName:string(NT)
Specifies the logical device name, used for user clarification.
/WriteBack:{On Off}
The default is Off.
If /Name:filename is present, turning WriteBack on will write the contents of the RAM
disk to the file when the Osprey shuts down.
/WriteProtect:{On Off}
The default is Off.
Controls write protect.
BLOCK Type Virtual Devices
= FW11
Specifies the RX211 double density disk with FWD0106 and FWD1106 extensions.
Drive Options (page 43) are allowed.
The default is /Adr:177170 /Vct:264 /Pri:5 /Slot:0
The CSR is the /Adr:
Cluster /Name:MYFILE.IMG = FW11 /Drive:RX01
/Deinterleave:{ON OFF}
The default is ON for units 0 and 1, OFF for other units.
Creates non-interleaved physical media.
January 17, 2003
Osprey User's Manual -- Page 50