Download Reference Manual

Reference Manual
NEVER partner does not expect EERP,
so don't create a receipt.
IMMEDIATE create a receipt and start a
session, if no session is available.
NORMAL create a receipt, but wait for a
session to transmit (suggested)
SYNC force transmission of a receipt
(EERP) for a received file in the same
session in which the file was
received.The connection is not closed
unless the EERP is created (after
successful file delivery). The rvs
parameter SYNCDL holds a time value in
milliseconds that shall be waited before it
is checked whether the EERP is ready to
be sent. The number of wait periods is set
by the rvs parameter SYNCTO. The rvs
parameters SYNCTO and SYNCDL should
be configurated in
$RVSPATH/init/rdmini.dat.
Example: If SYNCDL=400 and
SYNCTO=5, a time span not exceeding 5
times 400ms is waited until the
connection is closed. If in this time the
EERP is created, it is transmitted, and the
connection is closed immediately.
HOLD create a receipt, but do not send it.
When a receipt is released, send it in the
next session.
HOLD_IMMED create a receipt, do not
send it. When a receipt is released,
create a session and send it immediately.
Please read User Manual for more
information about releasing the receipts in
the status HOLD or HOLD_IMMED.
Default: NORMAL
Note: Default for station table (OP
parameters) is IMMEDIATE (see User
Manual, Station configuration, Odette
parameters).
EFIDGAPTIMEOUT
70
This parameter defines the interval at
which rvs starts the transmission again, if
the status of the transmission is unclear.