Download Embroidery Machine Instructions
Transcript
Part 3: Preparing the Fabric & Hoop 27. 28. 29. 30. Lay the fabric on your embroidery workspace table. With chalk, draw a crosshair on the fabric where the center of your embroidery pattern will be. Set up the tabletop ironing board. Tip: do not use the iron rest. Be sure the iron is unplugged, and all settings are in the OFF position before completing this step. Open the water fill hole cover on the iron, and fill the iron with water to the appropriate level at the Embroidery Machine Project Instruction Booklet 14 | P a g e