Download Embroidery Machine Instructions

Transcript
Part 3: Preparing the Fabric & Hoop
27.
28.
29.
30.
Lay the fabric on your
embroidery workspace
table.
With chalk, draw a
crosshair on the fabric
where the center of your
embroidery pattern will be.
Set up the tabletop ironing
board.
Tip: do not use the iron
rest.
Be sure the iron is
unplugged, and all settings
are in the OFF position
before completing this
step.
Open the water fill hole
cover on the iron, and fill
the iron with water to the
appropriate level at the
Embroidery Machine Project Instruction Booklet
14 | P a g e