Download TECHNICAL DESCRIPTION AND USER MANUAL

Transcript
1
INTRODUCTION
Network tester «ATLAN» provides performance analysis of various
network equipment or network segments for data transmission
compatible with Ethernet technology.
The device is best to use when building, setting, and maintaining
network infrastructure. It is especially useful when high bandwidth and
latency critical services are deployed such as IPTV, video on demand,
and so on.
«ATLAN» provides:
• Testing according to RFC 2544 methodology with direct connection
to copper or optical Ethernet interface.
• Testing over others technologies, that using Ethernet standards for
equipment connection (xDSL, WiFi, etc.)
• IP Delay Variation (Frame jitter) according to RFC 3393
• Standard testing utilities (ping)
• Copper cable fault detector
• Simple voice communication between devices
• Reports creation
2
OPERATING CONDITIONS
• Ambient temperature
• Relative air humidity
• Atmospheric pressure
3
−20 ÷ +50 oC
up to 90 % at 30 oC
86 ÷ 106 kPa
TECHNICAL PARAMETERS
Device power source is four AA NiMh accumulator batteries 1.2 V with
2,3 А/H capacity. This provides about 4 hours of operation (actual time
depends on link speed, optical module type and screen brightness).
External 220V AC to 12V DC adapter is used to charge accumulators as
well as device powering.
4