Download VALI Range Manual

19.9Fault Suppress
Checking this box will suppress the critical fault when the system is set.
19.10
System fault (terminals 17 and 18)
It is possible to choose if a failure on the mains shall be included/excluded
from the System failure relay.
19.11Activation Relay (terminals 13 and 14)
It is possible to choose if the relay shall reflect the time of fog
production(Smoke Active), or the time in which the VALI can continue to
produce fog, due to the retrigger function, or Cloak Sensor (Backstop).
19.11.1SmokeActive:
Is used to give a signal that there has been an activation.
19.11.2
Backstop:
Is used to give a signal during the time the area is protected.
The default duration is 15 minutes.
This can be used for triggering other devices eg. Strobe, sounder etc.
19.12Events
he VALI has the capability of creating an event log. This will display
T
details of times and dates of activations, fault output etc.
The most recent 50 events will automatically be downloaded to the
onscreen viewing window each time that a VALI is connected.
To gather all the remaining entries (up to 14oo) from the VALI, click the
‘Get All’ button.
This will gather all entries made and then present you with a dialogue box.
This event log can be downloaded and saved to an external location by
clicking the ‘Save’ button.
Clicking the ‘clear’ button will remove all entries currently shown in the
viewing window, Ensure these are saved prior to using the clear function
if required.
60
VALI Range user manual