1
Download User Manual
Transcript
Examples The first trigger used in the sequence is defined by the contents of the Trigger Start Register. For these examples, assume that the Trigger Start Register points to Trigger 1 (value 1). Key: TTR TDP TPP TFP TSR Trigger Type Register Trigger Data Pointer Trigger Pass Pointer Trigger Fail Pointer Trigger Stop Register Example 1. Find the word defined by Trigger Data 1, then save the number of messages defined by the PTC register. TTRl TDPl TPPl TFPl 000lH 000lH 0005H 000lH TSR 0006H Example 2. Find the message with word defined by the Trigger Data 2, followed by the Nth word within the message defined by the Trigger Data 4. Then, save the number of messages defined by the PTC register. U U M R B UM M 111000999888666 R Reeevvv B B TTRl TDPl TPPl TFPl 000lH 0002H 0002H 000lH TTR2 TDP2 TPP2 TFP2 TSR 0002H 0004H 0005H 000lH 0006H - 62 -
