1
Download EIS-project 2000
Transcript
Luleå University of Technology Industrial Electronics EIS-project 2000 1999-05-20 Bluetooth module 14 Intertaskcommunication Device driver for hardware Bluetooth task Real time clock Display task Display Button task Buttons RTC task Measuring task Pressure sensor Fig. 3.1.1 2.7.2 Valve Pump Block-scheme for the device drivers and tasks. RTXC Adaptation The code for the device drivers has been written in three stages. The first stage was to write them in pseudo-code, the next stage was to make them work on the naked processor and the last stage was to make the code run ontop of the RTXC. Step 1: Pseudo code Step 2: Convert pseudo-code to low level C-routines Step 3: Modify the low-level C-routines allowing them to run ontop of RTXC
