1
Download Notice - Agilent Technologies
Transcript
PRINTER: not on, not connected, wrong addrs Error Number The printer does not respond to control. Verify power to the printer, and check the HP-IB connection between the analyzer and the printer. Ensure that the 24 printer address recognized by the analyzer matches the HP-IB address set on the printer itself. PRINTER: paper error Error Number There is a paper-related problem with the parallel port printer such as a paper jam or out-of-paper condition. 171 PRINTER: power off Error Number The power to the printer at the parallel port is o. 174 PRINT/PLOT IN PROGRESS, ABORT WITH LOCAL Error Number If a print or plot is in progress and you attempt a second print or plot, this message is displayed and the second attempt is ignored. To abort a print or plot 166 in progress, press 4LOCAL5. PROBE POWER SHUT DOWN! Error Number One or both of the probe power supplies have been shut down due to an over-current, over-voltage, or under-voltage condition. 23 PROCESSING DISPLAY LIST Information The display information is being processed for a screen print to a copy device Message and stored in the copy spool buer. During this time, the analyzer's resources are dedicated to this task (which takes less than a few seconds). 10-20 Error Messages
