Download User Manual

Notes:
x
General Reset: you can select to delete only the snapshots or the profiles, or conversely to
UHVHW DOO SDUDPHWHUV EXW NHHS WKHVH PHPRULHV ´Reset Settingsµ FKRLFH )RU D FRPSOHWH
erasure with the restoration of all default settings, select ´Factory Resetµ. Caution: this
cannot be cancelled!
x
Aux. Functions: this sub-menu allows to enable the auxiliary functions ( (details on these
functions can be found in 2.4, Auxiliary functions), and select the baud rate for the data
channel. Besides, it also allows to enable or disable the displaying of the received SMS on the
LCD (active by default).
x
x
x
x
x
Relay Extension : Selection of feature available on each contacts and relays
Brightness: select the preferred front panel display brightness
x
x
FTP : You can configure the access of your FTP server to send your record files
x
Redial Attempts: you can adjust from 1 to 20 the number of attempts to reset the link in
case of a drop, or even ´Infiniteµ for redialing indefinitely.
x
Time before redial: (in seconds) adjust between 1 and 30 seconds, after a link loss, the
waiting time before redialing. It is often worth leaving such a pause, so that the cause of the
link loss is possibly cured, or the remote unit gets back to its normal state, etc.
Display Dimming: After 20minutes of inactivity, the display switch the brightness to low
Language: select the preferred language, and the menus are immediately updated.
5AS: by default the 5AS system for ISDN (cf. page 9, 5A System®) is active. If required, it can
be disabled using this sub-menu.
Auto Redial: this sub-menu deals with the auto redial feature, whose operation is described
in 3.5.2 above. For the double ISDN codec mode, auto redialling can be enabled separately
for each codec.
58
SCOOPY+ - User Manual