Download (SMV 3000) Electronics Module Replacement Kit Instruction

SMV 3000 Transmitter
Electronics Module Replacement
Save Transmitter Database
Use the procedure in Table 1 to create a file containing the transmitter’s database so that it can be
downloaded to the transmitter after the Electronics module has been replaced. Also, record any transmitter
status messages and the PROM serial number for reference before you begin the replacement procedure.
This procedure assumes that you are using the Smart Configuration Toolkit, SCT 3000 connected to the
SMV 3000 transmitter loop.
Table 1 Save SMV Transmitter Database
Step
Click on . . .
1
SCT.exe or the SCT
icon on your
desktop.
2
Enter user name.
3
Upload from the
Device dropdown
menu
- or Click on the Upload
icon in the toolbar.
Dialog box showing the upload action.
“Device”Tab
Displays the Device tab card.
4
Display
SCT title window is displayed.
Result or Action
A user name is required to open SCT
application.
The SCT application is opened.
The transmitter database is uploaded
to the SCT.
ATTENTION Be patient, this
operation may take up to five minutes
or longer.
The tab card contains the following
information about the transmitter:
Tag ID, Transmitter type, PROM serial
number (PROM ID) and Firmware
version.
Record the PROM serial number:
____________________________
5
“Status” Tab
Displays the status of the transmitter.
Record any status messages
displayed in the window:
____________________________
____________________________
____________________________
____________________________
6
Save As from the
File dropdown menu.
Dialog box that allows you to name a
file (transmitter database) to save.
The transmitter database is saved as a
SCT file that you named.
Record the file name:
________________
Page 2 of 7
Form 34-SM-33-01