1
Download ProMax x-ray
Transcript
DIMAX3 DIGITAL SYSTEM INSTALLATION 10.7 Attaching and removing the fixed sensor head NOTE To remove the sensor head start from the end of this section, page 50. NOTE If the unit is equipped with movable sensor head, attach the sensor head to the adapter according to the instructions given in section 10.6 “Attaching and removing the movable sensor head” on page 42. The sensor head adapter front cover is attached to the C-arm with Velcro tapes and can be removed by pulling it from its position. Adapter front cover Remove the C-arm upper covers as follows. Unscrew the eight attachment screws with the 2.5mm Allen key. Slide the tube head cover plate and the receptor cover plate from their positions as shown below. Receptor cover plate Installation manual Tube head cover plate ProMax x-ray unit 45
