Download Team Name: iSEDE

Student Experiment Documentation
Page 154
The camera supports and the hub were then fitted to the gondola and the
cameras were checked to make sure that they could capture images of the
whole experiment.
7.2.3 Day 3: 6th October
The damaged section of flexible circuitry on Bru had its components
desoldered and removed, and the power was rerouted around it with wires.
This restored the functionality of the remaining circuitry.
The hub electronics were then integrated into the hub.
The experiment was then tested with flight batteries with the BEXUS
electronics expert present. The experiment was powered on and off
successfully during this test.
It was found during this test that the webcam providing the live feed did not
have the field of view to see the satellites and the LEDs on the hub at the
same time.
The webcam had to be repositioned at the top corner of the gondola. This
allowed a view of the LEDs on the Hub and a partial view of one satellite.
BX16_iSEDE_SEDv5-1-31JAN14