Download datasheet FH
Transcript
Vision System FH-Series Easier to Embed in Machine, Shorter Machine Cycle Times • Calculations are easy to set for the results from four parallel tasks. • Synchronous control of devices connected via EtherCAT is possible. • The new Shape Search III processing item enables fast, precise, and stable measurements. • Microsoft® .NET is supported to share machine interface with PC. • User interface customization is supported. System configuration EtherCAT connections for FH series Example of the FH Sensor Controllers (4-camera type) Sysmac Studio Standard Edition Vision Edition Machine Automation Controller NJ/NX series EtherCAT junction slaves Vision System FH Sensor Controllers EtherCAT Cables *1 Lighting Controllers External Lightings special cable for cameras Ethernet Cables *2 Cameras Incremental rotary encoder special cable cable tor Touch Panel interface special cable for Touch Panel Monitor Touch Panel Monitor FH-MT12 Another slave (With built-in EtherCAT slave function) special cable for I/O Trigger input sensor EtherCAT Cables *1 PLC for I/O control Lighting Controllers *1. To use STP (shielded twisted-pair) cable of category 5 or higher with double shielding (braiding and aluminum foil tape) for EtherCAT and RJ45 connector. *2. To use STP (shielded twisted-pair) cable of category 5 or higher for Ethernet and RJ45 connector. Ordering Information FH Series Sensor Controllers Item CPU High-speed Controllers (4 core) Box-type controllers Standard Controllers (2 core) No. of cameras Output Model 2 NPN/PNP FH-3050 4 NPN/PNP FH-3050-10 8 NPN/PNP FH-3050-20 2 NPN/PNP FH-1050 4 NPN/PNP FH-1050-10 8 NPN/PNP FH-1050-20 FZ5 Lite Series Sensor Controllers Item CPU No. of cameras Output Model NPN FZ5-L350 PNP FZ5-L355 NPN FZ5-L350-10 PNP FZ5-L355-10 2 Box-type controllers Lite Controllers 4 Note: Refer to the FZ5 Series Data sheet (Cat. No. Q203) for Ratings, Specifications and Accessories. 28