Download User`s Manual

SerVision
SVProxy3 User Guide
• Field
• Description
recognized by the network gateway as being included in its local network.
Default
Gateway
The internal IP address of the LAN’s router (network gateway)
If you do not know this value, contact your ISP or your network administrator.
Note: If this field is not filled in correctly, you will not be able to access the unit from
outside the network, but you will be able to connect to the unit by running the
MultiClient on a computer on the same network as the unit.
DNS 1
The IP address of the primary DNS server used by the LAN. A DNS server enables you
to enter names instead of IP addresses for video gateways and for the proxy and
DDNS servers. The DNS server may be operated by your internet provider (home
installation) or on your network (some office installations).
If you do not know the IP address of the DNS server, contact your ISP or your network
administrator.
DNS 2
The IP address of an additional DNS server that is used by the LAN (optional)
3. Click Update.
4. Click Save. The changes are saved on the unit. The changes are implemented after you restart the unit (see
Resetting the Unit, page 44).
General Settings
The name of the SVProxy3 system is set under General Settings. In addition, if necessary, you can activate SSH
access under General Settings.
Specifying a Name for the SVProxy3 Unit
You can specify a name for the SVProxy3 unit. This name identifies the unit in client applications such as the
MultiClient.

 To specify a name for the unit:
1. In the main menu, under System, click General Settings. The General Settings screen opens.
Configuring SVProxy3
35