Download Serial Port

Chapter 6
Dial-in (Serial Port)
6
This Chapter details using the Serial (RS232) Port for Dial-in use.
Overview
The Serial (RS232) port can be used for Internet Access or to provide RAS (Dial-in) access to
your LAN.
•
If used for Internet access, the WAN (Ethernet) Port cannot be used.
•
Both Internet Access and Dial-in Access can be enabled simultaneously, but if the modem
is in use, a Dial-in user will only get a "busy" signal on their telephone line.
Dial-in Screen
This screen is reached via the Dial-in link on the main menu.
Figure 35: Dial-in Screen
Data - Dial-in Screen
Modem
Type
Select None if nothing is connected to the Serial Port, or you do not
wish use to use the Serial Port.
For Permanent Connection (leased line):
•
Ensure the Serial Line Speed is set to match the speed on your
leased line.
•
Ignore the Telephone numbers and "Disconnect after Idle" setting.
For Modem:
63