Download Documentation - Mahmoud Zeidan

Transcript
the pixels from the two polys compete for the same screen
pixel. This is particularly
a problem for decals (polys attached to another surface to
represent details such as
bulletholes etc.).
@par
A way to combat this problem is to use a depth bias to
adjust the depth buffer value
used for the decal such that it is slightly higher than the
true value, ensuring that
the decal appears on top.
@param bias The bias value, should be between 0 and 16.
*/
virtual void _setDepthBias(ushort bias) =0;
/** Sets the fogging mode for future geometry.
@param mode Set up the mode of fog as described in the
FogMode enum, or set to FOG_NONE to turn off.
@param colour The colour of the fog. Either set this to the
same as your viewport background colour,
or to blend in with a skydome or skybox.
@param expDensity The density of the fog in FOG_EXP or
FOG_EXP2 mode, as a value between 0 and 1. The default is 1. i.e.
completely opaque, lower values can mean
that fog never completely obscures the scene.
@param linearStart Distance at which linear fog starts to
encroach. The distance must be passed
as a parametric value between 0 and 1, with 0 being the
near clipping plane, and 1 being the far clipping plane. Only
applicable if mode is FOG_LINEAR.
@param linearEnd Distance at which linear fog becomes
completely opaque.The distance must be passed
as a parametric value between 0 and 1, with 0 being the
near clipping plane, and 1 being the far clipping plane. Only
applicable if mode is FOG_LINEAR.
*/
virtual void _setFog(FogMode mode = FOG_NONE, ColourValue
colour = ColourValue::White, Real expDensity = 1.0, Real linearStart =
0.0, Real linearEnd = 1.0) = 0;
/** The RenderSystem will keep a count of tris rendered, this
resets the count. */
virtual void _beginGeometryCount(void);
/** Reports the number of tris rendered since the last
_beginGeometryCount call. */
virtual unsigned int _getFaceCount(void);
/** Reports the number of vertices passed to the renderer since
the last _beginGeometryCount call. */
virtual unsigned int _getVertexCount(void);
/** Generates a packed data version of the passed in
ColourValue suitable for
use as with this RenderSystem.
@remarks
Since different render systems have different colour data
formats (eg