1
Download SED Template
Transcript
Page 106 Student Experiment Documentation Sampling setup Enter condition: Experiment nominal altitude is reached Exit condition: Valves are open Operating Mode: Autonomous Description: Before performing the sampling we have to open valves. In this stage a loop is used to open valves and check the flow inside the SU pipelines. All parameters are monitored, sent to GS, and logged on the internal SD. System components Status Communication links ON Sensors ON Data-loggers ON Valves OFF Pump ON Air Ion Counters ON Particle Counter ON GPS ON Table 4.8-4 Sampling setup state Start Open valves Acquire sensory data Write to SD NO GS communication Are valves open? YES Set SAMPLING State Figure 4.8-4 Sampling setup state
