Download 5. front panel

Setup
This menu mainly contain items about electrical settings. (Charge voltages,
alarm voltages, charge mode, …etc.)
Float Voltage
Equalizing Voltage
Boost Voltage
DC Low
DC High
Battery Too Low (Only for devices having OPS-03 option)
Battery Low (Only for devices having OPS-03 option)
Battery High (Only for devices having OPS-03 option)
Current Limit
Charge Mode
Equalize - Boost Duration
Calibration
This menu block allows the user to fine tune the measured values of the
rectifier, without any intervention to the electronic hardware of the
equipment. Using this menu only by authorized personnel is recommended.
Output Voltage
Output Current
Input Voltage (R)
Input Voltage S (Only 3 phase input devices)
Input Voltage T (Only 3 phase input devices)
Battery Voltage (Only for devices having OPS-03 option)
Battery Current (Only for devices having OPS-03 option)
Ver1.2
PAGE :
17