Download USER`S MANUAL
Transcript
FEATURES The PF-6 is an electronic device used for air inlet control in livestock buildings. In combination with an environment controller, the PF-6 coordinates the movement of the air inlets with the operation of the fans using a potentiometer located on the panel drive. Additional units can be connected to the PF-6 for an independent control of additional air inlets. The main features of the PF-6 are as follows: DIGITAL DISPLAY A digital display shows the operation parameters and alarm messages. PILOT LIGHTS Pilot lights indicating the state of outputs allow you to monitor the operation of the system from a distance. ALARM OUTPUT The controller generates an output signal that will activate any alarm system in the case of various operation problems. HYSTERESIS A hysteresis prevents the air inlet panels from oscillating around the desired position when small variations in fan speed occur. PERMANENT MEMORY Settings are retained in memory even in the event of a power failure. OVERLOAD AND OVERVOLTAGE PROTECTION Fuses located at the input and outputs of the controller protect its circuitry in the case of an overload or overvoltage. COMPUTER CONNECTION A computer can be connected to the PF-6 to centralize information management and provide monitoring and datalogging possibilities. 4 PF-6.rev.07