Download GenePrint® 10 System

5.A. Detection of Amplified Fragments Using the Applied Biosystems® 3500 or 3500xL Genetic
Analyzer with POP-4® Polymer (continued)
4.
To create a new QC Protocol, navigate to the Library. Select “QC Protocols”, then select “Create”. Alternatively, a previously created QC Protocol may be used.
11272TA
Assign a descriptive protocol name. Select the size standard created in Step 3. The settings for the QC
protocol should be based on the internally validated conditions for the GenePrint® 10 System on the
Applied Biosystems® 3500 or 3500xL Genetic Analyzer. Figure 5 shows one option for these settings.
Figure 5. The Create New QC Protocol window.
16
Promega CorporaƟon · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · 608-274-4330 · Fax 608-277-2516
TM392 · Revised 7/14
www.promega.com