Download not CS 50

1.4 Safety Comments
Use with Other Products
The CS 500 is designed exclusively for the control and monitoring of ventilation units.
Only third-party products that Flexit has supplied with the CS 500 unit or that Flexit has
recommended can be integrated in the system without restrictions. In relation to the
overall configuration, the user must follow all safety instructions from the suppliers of
such products.
It is possible to connect or integrate third-party products that have not been
recommended by Flexit, but such products must meet the safety requirements and
other technical requirements specified in the relevant product descriptions.
1.4.1 Requirements for Installation Engineers/System Operators
Preparatory work on and commissioning of the CS 500 unit must be performed by
qualified personnel who have received training from Flexit.
The CS 500 must only be operated by people who have received adequate training
from Flexit or Flexit’s representatives and have acquired knowledge of possible risk
areas.
1.5 Environmental Info: Protection/Disposal
Environmental
Protection
The CS 500 controller has no negative impact on the environment.
Disposal
The symbol on the product shows that this product must not be treated as household
waste. It must be taken to a reception station for recirculation of electric and electronic
equipment.
By ensuring the correct disposal of the equipment, you will contribute to preventing the
negative consequences for the environment and health that incorrect handling may
entail. For further information on recirculation of this product, please contact your local
authority, your refuse collection company or the company from which you purchased it.
8/67
FLEXIT AS
CS 50/CS 500 User Manual
94269