1
Download Vertical MBX IP Description Operations and Programming Guide 1.7
Transcript
Alternate Ring Assignment (TRANS/PGM 181) A-63 Appendix A: System Programming Tables TRANS/PGM 180 BTN RANGE DEFAULT ARS DGT 2 -- Second alternate CO Group Access code to be used when original CO Group Access code and first ARS code failed to find available CO line. 8 Max 8 digits - ARS 2 OGR DGT -- When alternate CO Group Access code is used, this field defines if original digits or converted digits are used. 9 0: Off 1: On Off Alternate Ring Assignment (TRANS/PGM 181) The Supplementary Ring Assignment Table, is used for programming alternate ring destinations which can be stations or any feature code (stations do not have a delay value). 1. Press the [TRANS/PGM] button and dial 181. 2. Enter Table index. 3. Press the desired Flex button; refer to Following Table 4. Use the dial pad to enter desired data for the Attribute. 5. Press the [SAVE] button to store the data entry. TRANS/PGM 181 BTN RANGE DEFAULT SERVICE TYPE -- If set as 0-2, ring option is applied to ring assigned stations. Otherwise, if set to 3, feature code is activated for incoming calls. 1 0: All Ring 1: First Idle 2: Circular 3: Feature Code All Ring CO RING ASSIGN -- Destination stations can be edited using a range or one by one. If press Flex 1-4 and then dial station range (up to 30 stations) or edit one station number. 2 (00-30) or one station number - FEATURE CODE -- If set to Feature Code and valid feature code is assigned, then assigned feature is activated when there is an incoming call. NOTE: Feature Code is not applied to rerouted calls. 3 Valid Feature Code (Refer to PGM115) - FEATURE DELAY -- If Service type is set to Feature code, it can be delayed. 4 00-30 (secs) 00 SYSTEM GROUP DATA - TRANS/PGM 200-215 Stations can be grouped for call routing, dialing, call pick-up, or various purposes. Release 1.7 MBX IP Description / Operations & Programming Guide April 2012
