Download Universal Library LabVIEW User"s Guide

Universal Library Virtual Instruments (VIs)
Memory board VIs
MemWrite.VI
Writes data from an array to the memory card.
Summary:
Inputs:
BoardNum [U32] - The board number assigned when installed with InstaCal. Can
Output:
be 0 to 100.
DataBuffer [U16] - Pointer to the data array.
FirstPoint [I32] - Index of first point to write or FROMHERE.
Count [I32] - Number of samples (words) to write.
ErrCode [I32] - Error code. See ErrMsg.VI
Arguments:
BoardNum
DataBuffer
FirstPoint
Count
ErrCode
The board number associated with a board when it was installed with InstaCal.
Buffer containing data to be written to the external memory board.
Use the FirstPoint argument to specify where in the board's memory to write the
first point. For example, to write to locations #200 - #250, set FirstPoint=200 and
Count=50.
To write a large amount of data to the board in small portions, set FirstPoint to
FROMHERE (-1) to write each successive portion. Using FROMHERE (-1) speeds up the
operation of MemWrite when working with large amounts of data.
Specifies the number of words to be written to the external memory card. Count
must be equal to or less than the size of DataBuffer.
Error code from the Universal Library. Zero if no error occurred. Use the ErrMsg
VI to convert ErrCode into a readable string.
Notes:
DT Connect conflicts - The MemWrite VI can not be called while a DT Connect transfer is in progress. For
example, if you start collecting A/D data to the memory board in the background (by calling AInScBg.VI or
AInScFg.VI with the DTCONNECT + BACKGROUND options). You can not call MemWrite until the AInScBg.VI or
AInScFg.VI has completed. If you do you will get a DTACTIVE error.
94