Download USER MANUAL - T

T-RIP Configuration
Configuring T-RIP for the First Time
When you open T-RIP for the first time you need to do basic setups. Again, you can open T-RIP from the
Windows Start button or from an icon you placed on your desktop.
Most of the screens are self explanatory and ALL changes you make here can be changed later inside TRIP.
IMPORTANT: For T-RIP to communicate with your printer during these steps your printer must be
connected to the computer (hopefully you have printed a test page to make sure it is working
correctly), and the printer MUST BE ON.
T-RIP uses a common term called a queue that is what the basic printer driver and workflow is called. You
can create a number of “queues” and each can have their own features, printer drivers, film sizes, and print
modes. In most cases you will just be creating one queue in T-RIP.
The following configuration setup may vary slightly depending on your computer operating system
and your inkjet printer model.
You need to install the printer you will be using. Click on Install Printer. In this same window you will need to
specify the printer model. In some cases there is more than one version of your printer model. Make sure to
select the correct printer model from the drop down list. Again, make sure your printer is connected and
ON.
21