Download User Manual

connected to a wireless network. If you would like to
connect to PC with a USB cable, you will need to
install ActiveSync 4.5 or later version in your PC.
Please find the drivers in the ActiveSync and
Application Software CD.
1. Tap Start > Programs > Phone Manager >
Internet Sharing.
2. Select “USB” or “Bluetooth PAN” in PC
Connection.
3. Connect your phone to a PC/Notebook with a
USB cable or Bluetooth, and then, tap “Connect”.
Note: Before you tap “Connect”, you need to
make sure:
1. You have inserted a SIM card which supports
GPRS.
2. You have connected this phone to your
PC/Notebook with a USB cable or Bluetooth.
3. You have disabled ActiveSync.
Note: Reboot is required when you change the
IP address in Start > Settings > Connections
tab > Wi-Fi > Network Adapters tab > Edit > IP
Address tab.
6.6 USB
You may use your device as a mass storage device
or a reader of Micro SD card.
1. Tap Start > Settings > Connections tab > USB
2. Tap “SD-Card Reader”, and then, tap “Change”.
3. Connect the device to the computer with a USB
cable.
4. Your computer will detect the new hardware
automatically.
6.5 Wi-Fi
Your device can connect to the detected network
through Wi-Fi.
1. Select Start > Settings > Connections tab >
Wireless Manager.
2. Tap “Wi-Fi”.
3. Tap OK to activate wireless network and exit.
When you activate Wi-Fi, a new window, “New
Network Detected”, will appear. Select “Connect”
and input your password to the local network. Tap
“Connect” to connect to this device via local network.
S1200│6-3